Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Irving
A new garage door installation in Irving typically runs $700 to $2,200 for a standard steel sectional, and most jobs take one day once the door is measured and on hand. We work in Irving every week, so we know the tight alleys, the HOA rules, and how the clay soil under Las Colinas can throw a frame out of square before the first panel goes up. Call Otto at (945) 445-8489 and you’ll get a real person, a straight price, and a date that actually works.
If you live in a Valley Ranch home built in the 1980s with the original door still hanging, or a Las Colinas townhome where the association has opinions about every paint chip, you’re not looking for a franchise call center. You’re looking for someone who’s done this exact job on your street. That’s why our Garage Door Installation crew carries pre-approved spec sheets for the HOAs we see most often in Irving, so your board review doesn’t stall the job for three weeks.
Why Otto’s Garage Door Is Irving’s Preferred Garage Door Installation Company
Otto Reinhardt has run this shop since 2004, and the name on the license is the name who answers the phone. Homeowners in Irving don’t ask us to prove we’re local. They ask their neighbor who fixed their spring in Valley Ranch, or they check the published address and license number on our invoice before the truck even leaves the driveway. That’s how it should work.
When someone from Irving calls about a new door, Otto quotes the job on that call and holds the number when he gets there. No upward revision at the door. No “well, once we looked at your tracks” stories. The price you agree to before we arrive is the price on the invoice when we leave, and that’s written down, not implied.
We know that Irving isn’t one housing market. It’s three or four. The 1950s ranch homes near downtown with converted carports and odd openings need one kind of attention. The steel sectional doors in Valley Ranch that all hit their 30-year mark around the same time need another. The Las Colinas townhomes with architectural review boards need a third. We do all three, and we carry the experience in the truck, not in a script.
Every technician who shows up in Irving is background-checked, uniformed, and working under Otto’s name, not an anonymous badge number. And if something isn’t right within 90 days, one call brings Otto back himself. That’s the Done Right Promise, and it’s on every invoice we leave in Irving.
Our Garage Door Installation Services in Irving
New Door Installation
A full new door installation in Irving runs $700 to $2,200 depending on size, material, insulation, and whether your opening needs re-squaring first. We handle the whole job: removing the old door, checking the header and jambs for clay-soil shift, hanging the new sections, balancing the torsion springs, and setting the opener limits. In Las Colinas, we’ll pull the pre-approved spec sheet for your association before we order anything, because ordering a door the board hasn’t approved is how you end up paying twice.
Single Car Door
Single-car garage openings in Irving show up most often in older homes near downtown and in the smaller townhome units around Highway 183. These doors are frequently non-standard widths from the 1960s or 1980s, which means a box-store door won’t fit without modifying the opening. We measure to the half-inch, order a door cut to your frame, and quote the full price before any work starts. A typical single-car installation in Irving lands between $700 and $1,400.
Double Car Door
Double-wide doors dominate Valley Ranch and the larger single-family sections of Irving, and they’re heavy. A 16-foot steel sectional can weigh 200 pounds or more riding on two torsion springs, and every component has to be square or the door chews through rollers and cables in a season. We install double doors with high-cycle springs rated for 25,000 cycles, not the 10,000-cycle springs that came with the original equipment. That matters when every house on your block was built in the same five-year window and the original springs are all giving out together.
Custom Garage Door
Custom work in Irving usually means one of two things: matching an HOA-mandated color and panel profile in Las Colinas, or building a door for an unusual opening that nothing off the shelf will fit. We’ve done both. Otto keeps a binder of pre-approved spec sheets for the associations we work with most in Irving, and we can walk you through the architectural review submittal step by step. For ranch homes with carport conversions, we order through Clopay and Amarr custom lines so the door looks like it was always there.
Steel doors are the default choice in Irving for a reason. They handle hail season better than aluminum, they’re affordable, and Clopay and Amarr both offer insulated steel sections that cut down the heat bleeding into your garage from July through September. Wood doors are available if your HOA or your own taste calls for them, but we’ll tell you straight: wood requires more maintenance in North Texas than steel, and it costs more up front. If you want the look without the upkeep, a steel door with a wood-grain finish from Wayne Dalton is usually the smarter call in Irving.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We install and service doors and openers from Genie, Clopay, Amarr, and Wayne Dalton, which covers the brands you’ll actually find on homes across Irving. Because we work in Irving every week, we don’t have to special-order every part from a warehouse two states away. Common sections, springs, rollers, and opener parts for these brands are on the truck or in our local stock, which means you’re not waiting a week for a rail or a hinge when the job is mid-installation. If your existing opener is a Genie and you want a new Clopay door, we’ll match the mounting and remote compatibility on site.
Common Garage Door Installation Problems We See in Irving Homes
- HOA rejections in Las Colinas. Installing a door without architectural review board pre-approval means a forced re-do, a fine from some associations, and a door you can’t return. We keep pre-approved spec sheets for the boards we work with most often in Irving so your submittal goes through the first time.
- Racked frames from black clay soil. Irving sits on expansive clay that swells after rain and shrinks in drought. Frames that were square in 1994 aren’t square now, and hanging a new door on a racked header means binding rollers and a door that won’t seal. We re-square before we hang.
- Undersized torsion springs from the 1980s and 1990s. The original springs on Valley Ranch doors were often rated for 10,000 cycles, and they’ve been done for years. Putting a new door on worn springs is throwing money away. We install high-cycle springs with every new door so you’re not redoing this in five years.
- Non-standard openings in older Irving homes. The ranch houses near downtown and along MacArthur often have single-car openings that don’t match any stock door. We measure, order custom, and fit the door to the frame instead of butchering the frame to fit a door.
Pricing for Garage Door Installation in Irving, TX
Here’s what you can expect to pay for garage door work in Irving right now. These ranges reflect what we’re actually quoting in Valley Ranch, Las Colinas, and the older neighborhoods around downtown, not a national average that doesn’t know what your association charges for an architectural review.
| Service | Typical Price Range in Irving |
|---|---|
| New Door Installation | $700 – $2,200 |
| Spring Repair | $180 – $340 |
| Track Realignment | $120 – $240 |
| Opener Installation | $250 – $550 |
Steel doors in Irving start around $700 for a basic single-car and run toward $2,200 for an insulated double-car door with windows. Custom work pushes higher, and wood doors land at the top of the range or beyond. The quote Otto gives you on the phone is the price written on the invoice. Nothing gets added at the door, and every job includes a free estimate before any work starts. If you have a written estimate from another company, bring it. Otto will give you a free second opinion and tell you whether that price is fair or padded.
We Also Serve Cities Near Irving
Our Garage Door Installation in Irving crew also handles adjacent communities, including Addison, Richardson, Carrollton, and Coppell. If you’re on the Irving side of those borders, call the same number and you’ll get the same local service. Otto covers the whole area without routing you through a call center.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Irving
Yes, in most Las Colinas associations you need architectural review board pre-approval for garage door color, panel style, and window configuration before installation. We keep pre-approved spec sheets for the associations we work with most often in Irving and will help you prepare the submittal so the job doesn’t stall on paperwork. Call (945) 445-8489 and we’ll tell you whether your specific community has a pre-approved list.
Irving sits on North Texas expansive clay, which swells after rain and shrinks during dry spells, and over years that movement racks door headers and jambs out of plumb. We re-square the frame before hanging any new door because installing on a racked frame guarantees binding, uneven wear, and a door that leaks air and water. Call (945) 445-8489 for a free assessment and an honest quote.
Yes. Most Valley Ranch homes were built with specific panel profiles and colors, and we match them through Clopay, Amarr, and Wayne Dalton. If your HOA has a pre-approved palette, we’ll order within it. If the original style is discontinued, we’ll find the closest current match and show you samples before ordering.
Yes, every new opener we install in Irving uses rolling-code remotes, which change the access code with each use so no one can clone the signal from a parked car on your street. In dense townhome communities like Las Colinas, where garages sit close together, that’s not an upgrade; it’s the baseline. We install LiftMaster, Genie, and Chamberlain openers with rolling-code as standard equipment on every job.
We prioritize hail-damage replacements in Irving during the spring storm season, and most jobs are measured within 48 hours and installed within one to two weeks depending on door availability. If your door is hanging but panels are dented, we can quote panel replacement as a faster and cheaper option. Call (945) 445-8489 the day you see damage and Otto will give you a straight answer on timeline and price.
Written by Otto Reinhardt, Owner at Otto’s Garage Door, working in Irving since 2004.